Inductive sensor

Connection connectors, M12 x 1. Vibration resistance. 55 Hz (1 mm). Shock resistance. 30g (11 ms). Degree of protection. IP68. Display switch state. LED yellow.
69KB Größe 10 Downloads 463 Ansichten
ñEdition: Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com

Inductive sensor Bi10U-EM30-AP6X-H1141

M30 x 1,5 46

36/5

LED

62 9

M12 x 1



threaded barrel, M30 x 1.5



stainless steel, 1.4301



factor 1 for all metals



degree of protection IP68



magnetic field immune



extended temperature range



high switching frequency



3-wire DC, 10…30 VDC



normally open, pnp output



connector, M12 x 1

Wiring diagram Type Ident-No.

Hysteresis Ambient temperature

10 mm flush ð (0,81 x Sn) mm ð 2% ð ± 10 % ð ± 15 %, ð -25 °C v ï +70 °C 3… 15 % -30…+ 85 °C

Operating voltage Residual ripple

10… 30VDC ð 10 % Uss

DC rated operational current No-load current I0

ð 200 mA ð 15 mA

Residual current Rated insulation voltage Short-circuit protection Voltage drop at Ie

ð 0.1 mA ð 0.5 kV yes / cyclic ð 1.8V

Wire breakage / Reverse polarity protection Output function Insulation class Switching frequency

yes / complete 3-wire, normally open, pnp ÷ ð 2 kHz

Housing Dimensions Housing material Material active face Tightening torque of housing nut Connection Vibration resistance Shock resistance Degree of protection

threaded barrel, M30 x 1.5 62 mm metal, AISI 304 plastic, PBT 75 Nm connectors, M12 x 1 55 Hz (1 mm) 30g (11 ms) IP68

Display switch state

LED yellow

pnp

1 BN

+

3 BU

–

2

4 BK

3 BU

1 BN 4 BK

Functional principle Inductive sensors are designed for wear-free and non-contact detection of metal objects. Due to a ferrite-less 3-coil system, uprox factor 1 sensors have distinct advantages. They detect all metals at the same switching distance, are magnetic field immune and feature large switching distances.

ñEdition: • 25.11.2008

Rated operating distance Sn Mounting condition Assured sensing range Repeatability Temperature drift

Bi10U-EM30-AP6X-H1141 1636340

Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com

ñEdition: Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com

Inductive sensor Bi10U-EM30-AP6X-H1141

Mounting instructions Distance D Distance W Distance T Distance S Distance G

minimum distances 2xB 3 x Sn 3xB 1,5 x B 6 x Sn

Diameter of the active area B

Ø 30 mm

T

G

S D

ñEdition: • 25.11.2008

W

Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com

ñEdition: Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com

Inductive sensor Bi10U-EM30-AP6X-H1141

Accessories Type code MW-30

IdentNo. 6945005

Short text

Dimension drawing

mounting bracket; material: stainless steel A2 1.4301 (AISI 304)

30,5

5,5

19,1 23

11,2 34,8 57,2

20,6 2,2

BSS-30

6901319

63,5

44,5

10,3

fixing clamp; material: polypropylene 5 40 ø 30

41

30

ñEdition: • 25.11.2008

57

Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com