I N S T A L L AT I O N I N S T R U C T I O N S NS1S12/20/28/36/41 Side Panels The NS1S side panels are designed for use with Chief® Raxxess S1 Series racks. See the specific installation instructions provided with the rack for additional installation information.

TOOLS REQUIRED / PARTS INCLUDED

B (4) 1/4-20 x 1-1/4"

A (1) [Side panel]

5/32" [security] (included)

C (1) 5/32" [security]

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installer’s responsibility to make sure all components are properly assembled and installed using the instructions provided.

IMPORTANT ! : If installing doors (not included) and side panels on an S1 rack, the doors must be installed before installing the side panels.

NS1S Side Panels Installation 1.

Align two bottom tabs in side panel (A) with slots in S1 rack. (See Figure 1)

(A)

(A)

S1 rack

2 (NS1S1223 rack shown)

Figure 2

Figure 1 2.

(B) x 4

(NS1S1223 rack shown)

Attach side panel (A) to S1 rack with four 1/4-20 x 1-1/4" security buttonhead cap screws (B). (See Figure 2)

3.

Tighten four screws (B) using the 5/32" security hex wrench (C).

4.

Attach additional side panels as required.

®Chief is a registered trademark of Milestone AV Technologies. All rights reserved. Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies 8821-002017 Rev01 ©2011 Milestone AV Technologies, 8401 Eagle Creek Parkway, Savage, MN 55378 a Duchossois Group Company • P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918 01/11